Home

The Hydrajaws M2000 PRO Anchor Tester Kit contains a universal set of adaptors enabling a comprehensive range of fixings and safety-critical applications, up to a maximum tensile load of 25kN (5620lbf) to be tested. Trusted by market-leading companies worldwide, the M2000 PRO Tester Kit is an essential tool for carrying out testing procedures in line with BS 8539, BS 7883:2019, BS EN 795:2012 and AEFAC-TN05. The M2000 PRO Tester Kit is easy to use and easily transported. It comes complete with a comprehensive full-colour user manual and backing and support from our technical team at Hydrajaws. Compatible with the FREE-to-use Hydrajaws Verify PRO App - Digital Reporting System.

The Hydrajaws M2000 Scaffold Tie Tester Kit is a specific kit allowing Scaffolders to test all common scaffold anchors and fixings in general use today in line with NASC Guidance Notes TG4:25. Manufactured to exacting high standards, the kit contains adaptors to test the most commonly used anchors used for scaffold ties up to a maximum tensile load of 25kN (5620lbf). The three-legged load spreading bridge keeps reaction loads away from the fixing allowing results to be more consistent. Trusted by the best scaffolding companies in the world, the M2000 Scaffold Tie Tester Kit is an essential tool for any scaffolder wanting to comply with current health and safety practices. Compatible with the FREE-to-use Hydrajaws Verify PRO App - Digital Reporting System when used with our digital gauge.

Verify Torque is a smart device that revolutionises torque traceability. It is a Bluetooth® torque wrench adapter that attaches to your existing tools, digitally capturing your torque data via a dedicated reporting app for compliance and traceability, which is securely stored in the cloud. An essential tool to follow manufacturer recommendations and industry standards for torque specifications in industries where compliance and traceability are paramount. Verify Torque becomes a digital torque wrench by simply attaching it to your existing tools, allowing you to measure and record torque easily and accurately. By installing the Hydrajaws Verify app on your smartphone or tablet, you can display measurement results and record measurement history, which allows for highly accurate measurements and also greatly improves work efficiency with data management.

The Hydrajaws M2000 PRO Anchor Tester Kit contains a universal set of adaptors enabling a comprehensive range of fixings and safety-critical applications, up to a maximum tensile load of 25kN (5620lbf) to be tested. Trusted by market-leading companies worldwide, the M2000 PRO Tester Kit is an essential tool for carrying out testing procedures in line with BS 8539, BS 7883:2019, BS EN 795:2012 and AEFAC-TN05. The M2000 PRO Tester Kit is easy to use and easily transported. It comes complete with a comprehensive full-colour user manual and backing and support from our technical team at Hydrajaws

A reusable NFC fixing tag that stays with the fixing for its lifetime. After a pull test or torque test, test data is written straight to the tag using NFC, then overwritten at each retest rather than replaced. Records are built to manufacturer and UK standards through the Verify app, keeping every entry accurate and compliant. Need more than 250? Get in touch using the link below for better shipping rates.

Verify Torque is a smart device that revolutionises torque traceability. It is a Bluetooth® torque wrench adapter that attaches to your existing tools, digitally capturing your torque data via a dedicated reporting app for compliance and traceability, which is securely stored in the cloud. An essential tool to follow manufacturer recommendations and industry standards for torque specifications in industries where compliance and traceability are paramount. Verify Torque becomes a digital torque wrench by simply attaching it to your existing tools, allowing you to measure and record torque easily and accurately. By installing the Hydrajaws Verify app on your smartphone or tablet, you can display measurement results and record measurement history, which allows for highly accurate measurements and also greatly improves work efficiency with data management.

The upgraded Hydrajaws Safety Lifeline Cable Tester KIT 2 is a complete kit enabling engineers to validate the installation of anchors, and eyebolts up to a maximum tensile load of 35kN (7868lbf) and swaged components on newly installed or existing engineered lifeline systems to ensure compliance with BS 7883 up to a maximum tensile load of 25kN (4496lbf). The upgraded 2024 edition of the Hydrajaws Safety Lifeline Cable Tester KIT 2 — comprehensive kit features a redesigned, lightweight, and compact form factor that enhances usability and convenience. Manufactured to exact high standards, the Hydrajaws Safety Lifeline Cable Tester frame clamps directly to the 8mm wire rope. It comes with all the accessories to test existing installations including those with long terminating assemblies without any additional parts needed.

The Hydrajaws M35+ Easi-Effort® Dual Load Capacity Digital Pull Tester 65kN can test up to 65kN/14613 lbf when attached to the medium bridge supplied with the kit. This lightweight and ergonomic pull tester is enhanced by Easi-Effort® Technology, increasing testing frequency and reducing operator effort. It is an essential tool for carrying out pull testing procedures in line with BS 8539, BS 7883:2019, BS EN 795:2012, BS 8610, NASC Guidance Note TG4:19 and AEFAC-TN05. The Hydrajaws M35+ arrives in a compact, tailor-made rugged rucksack, engineered for easy transportation to even the most remote and challenging job sites. Compatible with the FREE-to-use Hydrajaws Verify PRO App - Digital Reporting System.

This two-hour course gives delegates the skills to safely operate, maintain, and use the Hydrajaws M35+ pull-out tester. A certificate of competence will be issued following completion, and a passing grade of 80% has been achieved. On completion of the course, access will expire and will no longer be available.

 

You will receive access by email within one working day. If you have bought more than one course, we will email you for the additional delegates' details.

This two-hour course gives delegates the skills to safely operate, maintain, and use the Hydrajaws M2000 and M2050 pull-out testers. A certificate of competence will be issued, following the completion, and passing grade of 80% of this course. On completion of the course, access will expire and will no longer be available.

 

You will receive access by email within one working day. If you have bought more than one course, we will email you for the additional delegates' details.

A reusable NFC fixing tag that stays with the fixing for its lifetime. After a pull test or torque test, test data is written straight to the tag using NFC, then overwritten at each retest rather than replaced. Records are built to manufacturer and UK standards through the Verify app, keeping every entry accurate and compliant. Available in packs of 100 and 250. Need more than 250? Get in touch using the link below for better shipping rates.

The upgraded Hydrajaws Safety Lifeline Cable Tester KIT 2 is a complete kit enabling engineers to validate the installation of anchors, and eyebolts up to a maximum tensile load of 35kN (7868lbf) and swaged components on newly installed or existing engineered lifeline systems to ensure compliance with BS 7883 up to a maximum tensile load of 25kN (4496lbf). The upgraded 2024 edition of the Hydrajaws Safety Lifeline Cable Tester KIT 2 — comprehensive kit features a redesigned, lightweight, and compact form factor that enhances usability and convenience. Manufactured to exact high standards, the Hydrajaws Safety Lifeline Cable Tester frame clamps directly to the 8mm wire rope. It comes with all the accessories to test existing installations including those with long terminating assemblies without any additional parts needed.

The Hydrajaws Safety Lifeline Cable Tester KIT 3 is a standalone kit enabling engineers to validate the installation of swaged components on newly installed or existing engineered lifeline systems to ensure compliance with BS 7883 up to a maximum tensile load of 25kN. Manufactured to exact high standards, the Hydrajaws Safety Lifeline Cable Tester clamps directly to the 8mm wire rope. It comes with all the accessories to test existing installations including those with long-terminating assemblies without any additional parts needed. Kit also includes an 80Nm Verify Torque digital torque wrench adaptor.

The upgraded Hydrajaws Safety Lifeline Cable Tester KIT 1 (Frame Only), for operators who already own an M2000 or M35+ Tester, enables engineers to validate the installation of swaged components of newly installed or existing engineered lifeline systems to ensure compliance with BS7883 up to a maximum tensile load of 20kN. Manufactured to exact high standards, the Hydrajaws Safety Lifeline Cable Tester clamps directly to the 8mm wire rope. It comes with all the accessories, excluding the tester, to test existing installations including those with long-terminating assemblies without any additional parts needed. Kit also includes an 80Nm Verify Torque digital torque wrench adaptor.

A reusable NFC fixing tag that stays with the fixing for its lifetime. After a pull test or torque test, test data is written straight to the tag using NFC, then overwritten at each retest rather than replaced. Records are built to manufacturer and UK standards through the Verify app, keeping every entry accurate and compliant. Need more than 250? Get in touch using the link below for better shipping rates.

The Hydrajaws Shear Tester Add-on is a versatile and reliable solution for testing shear loads on anchors in construction materials like concrete and masonry. Designed to integrate seamlessly with an M2000, M2050 or M35+ load cell (available separately), this kit ensures precise shear load verification for your anchors.